Our ASTM PU40 Crash Rated Fixed Bollards are rated to stop up to 5,070 lb. vehicle traveling at 40mph. We can customize to your specifications with a variety of tops and finishes.
CSI Specifications Summary
Foundation Requirements: Depth: 30 inches (762 mm), Concrete: 4500 psi (31026.4 kPa) concrete, Rebar: No. 5 bar.
Compliance:ASTM F2656M-18a: PU40 P1, 5,070 lbs (2299.7 kg) at 40 mph (64.37 kph), less than 39.37 inch (1.0 m) penetration. Welding: Conforms with AWS D1.1 standard.
Bollard Height Above Finished Grade: 36 inches (914 mm); pavers or other concrete topper is acceptable up to an additional 4 inches (102 mm). Notify manufacturer of requirement in advance prior to fabrication.
Maximum Bollard Spacing: 48 inches (1219 mm) on center; meeting ADA handicap accessibility provision after decorative covers are installed.
Bollard Tops: Flat Cap, Domed Cap, Custom, Decorative Tops as scheduled and indicated on drawings.
Finish Options: Standard Corrosion Resistant Primer, Hot Dipped Galvanized Bollard Pipe, Exterior Powder Coat Color as scheduled and indicated on drawings, Optional Decorative Cover.